Series 1010
This is used as a fuel gas control
valve to feed the pilot on heated separators, treaters, and
other similar liquid accumulators, as well as on low
pressure, low volume dump valves on oil and gas production
separators, compressors, or any type of liquid accumulator.
Series 3030
This valve is ideally suited for
on/off modulating control of liquid, oil, or gas on low
pressure applications on oil & gas production separators,
heater treaters, compressors, or any other liquid
accumulator.
 Series
2001NF
This ruggedly-designed valve is used
for on/off control of high pressure water, oil, or gas.
Compressors scrubbers, separators, or other liquid
accumulators are a few suitable applications. The trim on
this valve is designed to be constantly immersed in vessel
fluid so at to use the warmth of the process to help prevent
freezing.
Series 2001TF
This valve is used for control of
liquid, oil, or gas. Typical installations include
compressor scrubbers, oil and gas separators, dehydrators,
and various liquid accumulators. It is installed direction
into the vessel to that the inner valve components may be
warmed by the process fluid, which will prevent or inhibit
freezing due to pressure differential or outside
environment.
Series 4040 K-Trim Valve
This valve is designed for control
of liquid, oil, or gas on high pressure applications. Gas
production separators, gas scrubbers, or any type of liquid
accumulators represent the typical applications for the
4040K.
4050 N-Trim Valve
This valve is used as a dump valve
in high-pressure scrubbers, separators, and other liquid
accumulators. |
