Wellmark Series 9500 Safety Relief Valves

These valves are for general purpose gas and air service and are recommended for over-pressure protection on separators, compressors, pressure vessels, heater-treaters, gathering and transmission lines, meter runs, and other systems where the rated capacities of the valve are commensurate with the requirements of the system. All of these valves are manufactured in accordance with the ASME Boiler & Pressure Vessel Code and have been capacity tested and certified by the National Board to meet the requirements of Section VIII of the ASME Code, as signified accordingly by the symbols "UV" and "NB" on their nameplates.

Available in 1" x 1", 2" x 2", and 2" x 1-1/2" MxF NPT Connections.

*Note that for best pop-off and re-seat operation, it is recommended to have at least 20% difference between operating and pop-off pressures (i.e., a system meant to relieve at 200 p.s.i. should have a normal operating pressure of no greater than 160 p.s.i.).

W1392V Vapor Relief Valve

This valve is designed for control of vapor emissions. It can be used on glycol dehydrator re-boilers to meet EPA standards, or any situation where pressure in ounces needs to be controlled.