|
Meter Leveling Saddles
The MLS Series Leveling Saddle is an accepted means to
support chart recorders on meter runs of as an economical
means to support pipe runs.
Fuel-Gas Shutoff Valve
This valve is for use in fuel gas scrubbers on gas
production units, indirect line heaters, heater treaters,
etc.
In-Line Testing Tool
WellMark's In-Line Testing Tool is an in-line device
installed between a safety relief valve and a pressure
vessel for in-field testing of pressure settings and/or seat
leakage.
 Probes
& Plugs
For fast, on-location pressure checks, use WellMark's
series of probes & plugs. Designed for use on wellheads,
flow lines, and pressure vessels, or wherever repetitive
pressure readings are taken.
LevelGlas
This is an accessory for use with in-line level control
connections in order to show visual liquid level over a
small area. Use wherever such visual indication is required.
 In-Line
Strainer
The Cemco in-line strainer is built for complete
production of mechanical equipment from the negative effects
of dirt, scale, welding slag, or other foreign matter. Its
rugged design is used on many kinds of equipment, from
separators and heater treaters to compressors for in-line
purification of gas lines.
 Blind
Flange Assemblies & Weld Necks
These assemblies are engineered for high/low pressure
vessels. Both straight and acme threads (with steel hammer
nuts) are available, with optional flanges allowing clean
out and level control instrumentation. Sizes available: 3",
4", 5", 6", 8". Materials: ASTM A106B, A126 WCB, A108, 1018.
Schedules: 80, 100, 120, 160, XXH.
CO2 Injection Skid Components
Injection Skid Components include Line Blinds, Flanges,
Spools, Tees, Strainers, and Controls to provide a complete
package for CO2 injection systems that are custom engineered
to fit any application. Designs up to ANSI Class 1500 are
available in 316 Stainless or Carbon Steel, with RF or RTJ
flanging (connections via threaded, socket, or butt-weld
flanges). May be used on steam injection, salt water
disposal, and water flood. |
