Black Hycar Apron
Hycar coated aprons provide liquid proof protection. Hycar is a rugged nitrile blend that is especially effective against grease and animal fats, especially in cold conditions. Aprons feature grommets for extra durability.

Style #166

  
  
  
Chemical Aprons
Made of double coated yellow neoprene to a finished weight of 8 oz. per sq. yard on nylon and bonded for maximized adhesion. Designed to resist mildew degradation to provide longer wear. Compounded for resistance to oils, greases, chemicals, abrasion and snagging.  100% water proof, 35" by 45" long, and features a stitched hem.

Style #CA

 

  
  
Back Support
Provides lower back support. Adjustable suspenders with smooth glide adjustable clips. Elastic suspenders are extra wide for durability, and abdominal support panels are tapered for better fit.

Style #51908
Sizes: S-XXL

The Black Steel Toe Boot
This boot is made of 100% waterproof, high-molecular weight, black PVC compound. The steel toe meets or exceeds ANSI Z41 PT99 M 1/75 C/75. The boot has high abrasive wear with a bar cleat outsole for traction in wet, muddy conditions.  16 inches high with steel toe. Sizes: 6-13

Style #1551 + size

Pac Boot
A cold weather boot that provides excellent protection against low temperatures and cold feet. The benefits of this boot include: ozone resistant red rubber, safety yellow toe caps, steel and spade shanks for strength and support, a steel toe that meets or exceeds ANSI specifications, 9mm wool felt midsole, polymeric foam insulation, durable nylon net lining, gum rubber reinforced ankle, tractor tread outsole, and thermoplastic heel counter.

Style #22312+size
Men's sizes: 6-14

  
  
Cooling Scarf
Cooling scarves help prevent heat stress by employing the principle of evaporation. Each scarf contains super absorbent material that holds 12 oz. of cooling water. This provides cooling for a duration of about 12 hours. The super absorbent material contains no harmful chemicals.

Style #AQC

Riding Coat
This horseman's riding coat is made of PVC and reinforced with a strong polyester net backing. Closure snaps are made from nonconductive Duracon. It has an inside storm fly front, a full corduroy stand up collar, one covered pocket, and one inside pocket.

Style #4020 + size - Yellow
Sizes: Small - 4X
Style #4020BL + size - Black
Sizes: L-3X

  
Riding Coat with Hood
Made of .35 mil PVC on polyester fabric that has long term durability and is well suited for a wide variety of job applications. It is 60 inches long with 2 inner leg snaps which form chaps. Features unisex front closure snaps, a corduroy collar with snaps, badge holder, cape-vented back, detachable hood and one inside and one outside pocket.

Style #267C
Sizes: 3-5X

 
 
Rainsuit, Extra Heavy Weight
45 mil. rubberized cotton with cemented, pressure lapped seams. The jacket comes with a detachable hood, storm-fly front with metal snaps and a full corduroy collar.  The bib overalls come with adjustable sides and elastic suspenders. Jacket has take-up snaps at the wrists and ankles.

Style #7050SD+size
Sizes: Medium – XXXL

Three Piece Rainsuit
The jacket comes with detachable hood, inside stormfly front with DURACON snaps, two flapped pockets, under arm vents, cape ventilated back, all PVC stand up collar and electrically sealed seams. Pants have a bib front, adjustable sides and elastic suspenders, fly with snap fastener, and reinforced buckle.

Style #9040DH+size
Sizes: Small - 5Xlarge

Raincoat
This raincoat features reinforced PVC with a strong durable polyester net backing, a detachable hood, a self material collar, a ventilated cape back, inside stormfly front w/nonconductive DURACON snaps, two flapped pockets and a badge holder on the left chest.

Style #9204+size
Sizes: Small - 4XLarge

Flame Resistant Sateen Cotton Coverall
Flame resistant coveralls made from 100% 9 oz. per sq. yd. cotton sateen fabric. Excellent for warm weather or indoor use, the flame resistant properties will last for a minimum of 25 and up to 50 laundering cycles when following proper care instructions. Color is visual green.
Other features include:

• Full cut patterns
• Anti-flash steel snap fasteners
• Bar-tacked stress points
• Color matched thread
• Five-thread safety stitched

Indura Proban Coveralls
9 oz. 100% cotton, containing flame resistant properties guaranteed for the life of the garment if proper laundering instructions are followed. FRI-681 contractor's style coverall, constructed with two-way brass zipper front closure, by-swing back, two front, rear and breast pockets, concealed snap closures. Coverall has elastic waistband, five-thread safety stitch. Available in navy blue, royal blue, orange and tan.

Nomex IIIA Flame Resistant Coveralls*
Nomex IIIA® Aramid is inherently flame resistant for the life of the garment. The flame resistant properties will not wash out or wear out. Our coveralls feature a concealed front snap closure, elasticized waist band, two front and two rear pockets and one left breast pocket. An optional feature is a concealed zipper front closure.

Our coveralls come in either 4.5 oz. per yard 100% NomexIIIA and 6.0 oz. per yard 100% Nomex IIIA. Both have Wickwell® finish for improved moisture absorbency and effecting body cooling. Special order.

Colors Available: royal blue, navy blue, orange, and tan.

Cooling Vest
The cooling vest by Steele is an advanced, but inexpensive solution to staying cool in hot environments. The evaporative vest supplements the body's natural sweating process by providing water for additional evaporation, which helps keep you cooler and hydrated. To enjoy cooling benefits, simply dip in water for about 2 minutes, wipe the inner surface dry and wear. Cooling can last up to 2.5 hours or more and can be easily recharged by resoaking.

Item #SEV

Surveyors Vest
Made from 100% polyester in a fluorescent orange and lime green color for safety. Has a non-corrosive zipper front closure with individual chest pockets for pens and tools. The two flap pockets have Velcro closure. There are also two inside front pockets. Stripes in vertical and horizontal patterns front and back. Available in Medium to 2X. Not ANSI complaint.

Class Rated Safety Vests
Classes I, II, III available
Vests are made with solid or mesh polyester with a zipper front in green or orange. Made in USA.
Sizes: M - 4X

Safety Vest
Make sure your employees are visible with our fluorescent blaze orange or lime green colored vest. This lightweight nylon mesh vest with velcro closure and reflective stripe on the front and back helps to ensure the safety of your employees. Not ANSI compliant.

  
  
Polypropylene Coverall
These limited use coveralls are ideal for non-hazardous, grimy work environments where a low cost disposable garment is needed. Coverall with collar and zipper. 25/box.

Style #15135 + size

  
  
  
Tyvek® Coverall with Open Cuffs
Tyvek® coverall with collar, zipper, set-in sleeve with open cuffs. Garment meets ANSI/ISEA 101-1993. 25/box

Style #TY120S

 

  
  
  
Tyvek® Coverall
Tyvek® with zipper, attached hood, and skid resistant boots,  elastic wrists and ankles, set-in sleeves. 25/box.

Style #TY122S

  
  
  
Tyvek® Coverall
Tyvek® coverall with collar, zipper, elastic wrist and ankle, set-in sleeve.  25/box.

Style #TY125S