Therm-o-plate 220 plates onto metal surfaces to withstand heat, pressure, wear and corrosive environments.

Therm-o-plate 220 is water repellant, chemically resistant and non-gumming. It has no known dropping point and features a synthetic, water-resistant base that will decompose at extreme temperatures, providing dry film lubrication.

It contains no particles of lead, copper or molybdenum disulfide, so it is suitable for use with stainless alloys at high temperatures.

Therm-o-plate 220 is a blend of lubricants, each with its own effective working range. It will give continuous service in journals and other loose-tolerance bearings thru 350 F (177 C).

Throughout this range it is a plastic-like brushable compound that can be applied to hot surfaces without flaming or obnoxious fumes. Therm-o-plate 220 begins to depolymerize above 350 F (177 C) as thermal decompositon points are exceeded. Micron-size dry film lubricants are plated onto metal surfaces to 1800 F (982 C).

The dry film functions well under slow heavy-load conditions. A special additive will keep hot metal surfaces from seizong and galling from 1800 F (982 C) to 2200 F (1204 C).

It is soluble with hydrocarbon and chlorohydrocarbon solvents and insoluble with polar solvents such as water, ethyl alcohol, iso-propyl alcohol, acetone, methyl-ethyl-ketone and glacial acetic acid at ambient temperature.

Therm-o-plate 220 is excellent for use with heavy, slow-speed slide applications. It is outstanding for journal and loose-tolerance bearings where binding could occur due to plating of micron-size particles on the metal surfaces. Bearings should not be overpacked as Therm-o-plate 220 works best as a thin film lubricant.

ThredOn 75 PTFE Thread Sealant

DESCO ThredOn 75 is a PTFE paste with a carefully selected blend of synthetic lubricants and inert fillers, diluted with low toxicity organic solvents that dry slowly to form a soft-set flexible thread sealant.

ThredOn 75 is formulated to provide leak and thread protection for pipes andfittings and permits easy nondestructive disassembly. It is formulated to form a positive PTFE seal with easy brush application on all connections.

ThredOn 75 does not contain lead or toxic heavy metals and will not harden in the tightly closed container.

The flexible ThredOn 75 PTFE thread sealant and lubrixant will give excellent service in acids, ammonia, aliphatic solvents, brine, hydraulics, pneumatics, aie, carbon dioxide, caustics, jet fuel (JP 4,5,6), diesel fuel, gasoline, Freon*, manufactured gas, steam, natural gas, and hot and cold potable water.

Recommended for thread and gaskets on steel, iron, brass, copper, aluminum, stainless, FRP, polyethylene, fiberglass, ABS, PVC, CPVC, or cycolac tubulars.

ThredOn 304 Lead-Free Copperhead

THREDON Copperhead Thread Lubricant (lead free) is formulated with micro size copper flakes. Additional additives give the product extreme pressure performance and greater lubricity. Contains compounds that have tremendous loading ability under all temperature ranges form below 00F to over 15000F (-180C to 8160C). The metallic compounds are blended into a nonflammable lubricant that exceeds API working parameters.

Thredon 304 Copperhead is formulated to prevent down-hole makeup, even when excessive drilling torqueses are required. This helps to prevent galling and ensures ease of breakout.

An excellent drill pipe and drill collar compound provides a positive seal on rotary shoulder connections under all drilling conditions while preventing galling.

Threadon 304 Copperhead has proven to be extremely reliable in underground boring applications. This environmentally friendly formula makes for ease of breakout upon

As an anti-seize compound it is used on fittings, flanges, tubing, coupling, gauges, studs, nipples, nuts, pipe threads, unions, pipe reducers, screws and valves. Can be used on power screws, sleeves, tool ways and guides, packing in U-joints, cams, dies and punches, taps and drills, lathe centers, drive chains, rod ends bearings, gears, cables, as a wire line dressing and on all tool joints.

As a high temperature lubricant it may be used on all threaded connections, flange connections, engine connections, heat exchangers, autoclaves, manifolds, ovens, boilers, cylinder heads, turbines, and burner heads. It is not recommended for stainless steel fittings where the temperature exceeds 5000F (2600C).

Service rating to 10,000 p.s.i. in confined threads. Temperature rating to 15000F (8150C).

ThredOn 302 Hannaseal65 PTFE Thread Sealant

A superior oil field sealant containing TFE. An Anti-Seize, Anti-Gall and Anti-Wear lubricant that can increase thread tremendously. -Prevents galling on makeup -Does not harden/will not dry -Usable in temperatures of –20F to 400F -Brushable to 0F -Vibration proof -With stands pressures to 20,000 p.s.i. -Seal any type of gas, steam or fluid

ThredOn 330 Hannaseal Special White PTFE Thread Sealant

THREDON Hanna-Seal Special Teflon Thread Compound is a special purpose lubricant/sealant for applications that require the best sealants. Hannah Seal Special is even suitable for critical services with high concentrations of CO2. The base carrier provides for protection against attack from the presence of CO2 with a high level of multi-particle size PTFE, to assure leak tight seals and ease of “break out”. It contains anti-galling components, rust and oxidation inhibitors plus other lubricant stabilizers.

·A superior sealant for use on all metal and fiberglass threads. ·Does not harden, will not dry. ·Vibration proof. ·Seals pressures to 20,000 psi. ·Suitable for all water lines and food processing streams. ·Will seal gas, steam or fluid.