Copperhead is formulated with micro-sized copper flakes and additional additives which give the product extreme pressure performance and greater lubricity. It contains compounds that have tremendous loading ability under all temperature ranges, from below 0˚F to over 1500˚F (-180˚C to 8160˚C). The metallic compounds are blended into a nonflammable lubricant that exceeds API working parameters.

Copperhead is designed to prevent downhole makeup, even excessive drilling torques are required. This helps to prevent galling and ensures ease of breakout. An excellent drill pipe and drill collar compound provides a positive seal on rotary shoulder connections under all drilling conditions while preventing galling - Copperhead meets this standard of performance.

It is extremely reliable in underground boring applications, while being environmentally friendly.

As an anti-seize compound, it is used on any of the following:

Fittings, flanges, tubing, couplings, gauges, studs, nipples, nuts, pipe threads, unions, pipe reducers, screws, and valves. Also, power screws, sleeves, toolways and guides, packing in U-Joints, cams, dies and punches, taps and drills, lathe centers, drive chains, rod end bearings, gears, cables, and as a wire line dressing on all tool joints.

As a high temperature lubricant, it can be used on all threaded connections, flange connections, engine connections, heat exchangers, autoclaves, manifolds, ovens, boilers, cylinder heads, turbines, and burner heads. It is NOT recommended for Stainless Steel fittings where the temperature exceeds 500˚F (2600˚C).

304 Copperhead is Service Rated to 10,000 PSI in confined threads, and Temperature Rated to 15,000˚F (8150˚C). It does contain special rust and corrosion inhibitors, and remains in perfect dispersion in either hot or cold weather. Its extreme pressure performance makes it ideal for natural gas plants, refineries, and petro or chemical plants.

ThredOn 305 Rotary Gold

ThredOn Rotary Gold is made with a Lithium Hydroxystearate Grease to which over 19% anti-galling components have been added. It also contains rust and oxidation inhibitors and other lubricant stabilizers. Copper flakes and amorphous grease are also present.

Rotary Gold is recommended for drill collars and high tensile strength tool joints where low coefficient of friction is desired. The product is not recommended for small tool joints which are used for slim hole frilling as low coefficient or friction could cause problems of over-tightening.

ThredOn 301 EZE-Break

ThredOn EZE Break 301 is a TFE-Based Drill Collar Compound is a high-pressure, lithium-based grease that contains Teflon-fluorocarbon resin, molybdenum disulfide, and special corrosion inhibitors to maintain a positive seal under pressure and ease of breakout without excessive torque. Recommended for rotary shoulder connections in high torque operations. It is easy to apply to hot, wet, or dry surfaces.

ThredOn 302 EZE-Break Drill Pipe TFE Thread Sealant

EZE-Break 302 is recommended for rotary shoulder applications involving extreme temperatures, high pressures, vibration, and worn or damaged threads. Chemically resistant, EZE-Break 302 is unaffected by most common fluids and gases (except oxygen) including live steam. This compound adheres to wet joints by displacing moisture, meaning long-lasting protection against corrosion and metal-to-metal contact. Also recommended for API Oilfield casing, tubing and line pipe, extreme pressures, precision threads, and where vibration and pressure surge.

ThredOn 303 API Modified High Pressure Compound

ThredOn API Modified is for casing, tubing and line pipe, and is manufactured in accordance with specifications and recommendations of API Bulletin 5A2 (1972). It rises above other API Modified compounds as a result of a unique blend of base greases which enhance application abilities to wet threads.

ThredOn 310 Z-40

This is a 40% Zinc Base Tool Joint Compound, manufactured with a special oxidation inhibitor to increase shelf life, anti-reactant additives to keep the zinc from gassing, and special wetting agents to assist in application to wet threads. It prevents galling and makes for easy breakouts.

ThredOn 311 Z-50

This is the API Standard for rotary shoulder connections. Containing 50% Zinc Base, it is usable on drill pipe and drill collars. It contains both oxidation and corrosion inhibitors as well as wetting agents for wet-thread application, and helps prevent galling and split boxes - ensuring easy breakouts.

ThredOn 312 Z-60

This Tool Joint Compound has the same benefits and additives as the other Z line TJCs, but uses a 60% Zinc base which makes it superior for broken in and slightly worn tool joints.

ThredOn 316 Rotary Red

ThredOn Red base TJC is formulated to achieve maximum anti-galling performance with minimum metal content. Its performance is enhanced by careful selection of certain nonmetallic anti-galling materials and special thread wetting agents.

Although most manufacturers recommend continued use of high-metallic-content lubricants throughout the life of the threads, it is well known that more economical materials are satisfactory in many applications. Careful operators use Red Base on well-broken-in tool joints at shallow to medium depths.

ThredOn 319 L2M Special

Thredon L2M Special TJC is made with polyurea grease. It is corrosion and wash out resistant, and is an economical, light-duty tool joint compound. It doesn't require any extra protection for extreme pressures. L2M Special contains anti-galling compounds, rust and oxidation inhibitors, and other lubricant stabilizers.

L2M Special is recommended for low-to-medium-pressures and torque. It will not harden or oxidize, and inhibits galling. It is brushable to medium temperatures. The polyurea base contains pure metallic lead for tool joint and drill collar applications.

ThredOn 821 Ultra-Pure Water Well Thread Sealant

ThredOn 821 is a specially formulated thread sealant that is nontoxic and non-staining. Using prime nontoxic materials for use in water well drilling applications as well as for PVC and fiberflass water piping systems, it will not harden or dry out and is unaffected by vibration. Can be used as a thread compound on monitor wells. It may also be used as a drilling compound on very light duty applications (water wells) where contamination is a concern. (This product is petroleum hydrocarbon free).